Eccentric screw pump tube HD-E-SR Industry

Preview: Eccentric screw pump tube HD-E-SR Industry

Eccentric screw pump tube HD-E-SR Industry

for mineral oils and disposal liquids

Order number: 0155-012
Price: upon request
is suitable for use in a container with a small bunghole

Description: The Eccentric screw pump HD-E-SR in the industrial version transfers the...more

Close menu

Product information "Eccentric screw pump tube HD-E-SR Industry"

Description:

The Eccentric screw pump HD-E-SR in the industrial version transfers the advantages of the Drum pump for viscous media quite simply to the highly viscous range. The positive displacement pump has an easily detachable outer tube, a bearing head with mechanical seal and a free-running shaft with an eccentric screw as the pumping element - all easy to dismantle and clean. Due to the small outer diameter of the pump tube of max. 41 mm, viscous liquids up to 30,000 mPas can be filled. The Pump tube can be suitably combined with our electric or air motors. This ensures the emptying of the liquids and thus saves important resources.

also available in special immersion depths
Pump tube equipped with Lutz original hand wheel
Media examples: Oils, glucoses, waste oils, disposal liquids,

Features & Advantages

Optionally driven by electric or pneumatic motors
Uniform volume flow
Light and versatile due to low motor weight
Continuous, low-pulsation delivery of up to 15 litres/min
Low wear
Easily detachable outer tube

Technical data

Pump tube (material):

Edelstahl (1.4571)

Static seal (material):

FPM (fluororubber)

Mechanical seal (material):

Kohle, SiC

Drive shaft (material):

Edelstahl (1.4571)

Stator (Werkstoff):

PTFE (Polytetrafluorethylen)

Delivery rate (up to max. l/min)*:

Delivery head (up to bar)*:

Fluid temperature (max °C):

100

Viscosity (up to mPas):

30000

Seal type:

Mechanical seal (MS)

Immersion length (mm):

from 1000 mm

Immersion tube diameter (up to mm):

Thread (inch) outside:

1 1/4"

Type of drive:

Electric, Compressed air

Type:

HD-E-SR

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Industry

Eccentric screw pump tube HD-E Industry

for oils, paints and disposal liquids

Food

FPM

Eccentric screw pump tube HD-E in PURE version

for mineral oils, paints, food and cosmetic...