Eccentric screw pump tube HD-E in PURE version

for mineral oils, paints, food and cosmetic products

Order number: 0155-010 + 0155-016
Price: op verzoek

Description: The Eccentric screw pump HD-E in PURE design transfers the advantages of the...more

Close menu

Product information "Eccentric screw pump tube HD-E in PURE version"

Version: PURE with FPM seal

Description:

The Eccentric screw pump HD-E in PURE design transfers the advantages of the Drum pump for low-viscosity media quite simply to the medium-viscosity range. The positive displacement pump has an easily detachable outer tube, a bearing head with Mechanical seal and a free-running shaft with an eccentric screw as conveying element - all easy to dismantle and clean. The Pump tube can be suitably combined with our single-phase motor. This ensures the draining of liquids and thus saves important resources.

also available in special immersion depths
Pump tube equipped with Lutz original handwheel
Examples of media: viscous cosmetic products, food and etc.

Features & Advantages

Smooth running
Uniform volume flow
Easy and quick cleaning
Gentle, low-pulsation product conveying
Low wear
Easily detachable outer tube

Technical data

Pump tube (material):

Edelstahl (1.4571)

Static seal (material):

FPM (fluororubber), EPDM

Mechanical seal (material):

SIC, Kohle, EPDM

Drive shaft (material):

Edelstahl (1.4571)

Stator (Werkstoff):

PTFE (Polytetrafluorethylen)

Delivery rate (up to max. l/min)*:

Fluid temperature (max °C):

100

Viscosity (up to mPas):

4000

Seal type:

Mechanical seal (MS)

Immersion length (mm):

from 1000 mm

Immersion tube diameter (up to mm):

Druckstutzen (DN):

Connection:

Tri-Clamp

Certification:

FDA-compliant, Verordnung (EG) 1935/2004

Type:

HD-E Pure

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter