Explosion-proof universal motor with double wall housing for pumping combustible and easily flammable liquids. Approved according to ATEX Directive 2014/34/EU
- Explosion-proof in compliance with II 2 G Ex db eb IIC T5 or T6
- Two protection classes (I and II) = highest safety standard
- 230V/50Hz, 795 W, protection class IP 54
Explosion-proof in compliance with II 2 G Ex db eb IIC T5 or T6. Double-pole ON/OFF switch, splash water protected in keeping with IP 54, double-pole thermal overcurrent release. 5 m connection cable with shock-proof plug (not explosion-proof), optionally available with explosion-proof plug.
These motors aren't taken aback easily. The ME II explosion-proof universal motors are the answer (German Patent DE 38 15427 C2) for pumping a large variety of thin-bodied, easily flammable and combustible liquids.
Double walls provide optimum protection
The inner part of the double wall housing is made of aluminium, the outer part is made of special acid-proof, non-conducting plastic. This prevents aggressive and corrosive vapours from intruding into the inner part of the motor. The airflow for cooling the motor is conducted between the two walls of the housing.
Tested quality and safety
Complies with the European Standards EN/IEC 60 079-0, EN/IEC 60 079-1 and EN/IEC 60 079-7, explosion-proof in compliance with II 2 G Ex db eb IIC T5 or T6 and built and approved in keeping with the explosion protection Atex Directive 2014/34/EU and IEC Ex.
Who is afraid of voltages|
All the motors of the ME II series feature a protective conductor connection. There is double insulation between the live parts and the touchable outer surface of the motor as well as of the pump tube. This guarantees protection against discharge sparks during potential equalisation, specially in explosive areas.
|Type of drive:||Electric|