REQUEST PRICE

Fields with * are required
LUTZ (U.K.) LTD. | Great Britain
Family business since 1954
julie.mcauley@lutz-jesco.com
+44 24 77 10 33 06
Centrifugal immersion pump B50

Centrifugal immersion pump B50

for neutral and aggressive liquids

Drive shaft:

Preis anfragen

Fields with * are required
  • 0180-500
  • upon request
Description: When circulating chemicals and pickling baths, reliability, safety and last...more
Product information "Centrifugal immersion pump B50"

Drive shaft: Stainless steel (1.4571)


Description:

When circulating chemicals and pickling baths, reliability, safety and last but not least functionality are important. The submersible centrifugal pump was specially developed as a vertical, wet-installed pump for the rapid emptying of these liquids from tanks and basins.

  • available in special immersion depths on request
  • equipped with self-lubricating, liquid-wetted plain bearings.

Features & Advantages

  • High flow rate
  • High efficiency
  • Smooth running
  • Low space requirement
  • Easy commissioning
  • Easy to maintain
Technical data
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): PP (polypropylene)
Impeller (material): PPO (Polyphenylenoxid) / PPE (Polyphenylenether)
Static seal (material): FPM (fluororubber)
Mechanical seal (material): Kohle, SiC, HC-4 (2.4610)
Drive shaft (material): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Delivery rate (up to max. l/min)*: 200
Delivery head (up to max. mWS)*: 22
Fluid temperature (max °C): 40
density (up to kg/dm³): 1.8
Viscosity (up to mPas): 100 (e.g. milk)
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Conveyor wheel shape / drive type: Radial-flow impeller
Seal type: Mechanical seal (MS)
Immersion length (mm): 1100
Immersion tube diameter (up to mm): 100
Thread (inch) outside: 1 1/2"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Version: Vertical
Type: B50 PP/ SS

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Service & Support