REQUEST PRICE

Fields with * are required
LUTZ (U.K.) LTD. | Great Britain
Family business since 1954
julie.mcauley@lutz-jesco.com
+44 24 77 10 33 06
Pump tube PVDF

Pump tube PVDF

for concentrated acids and alkalis

Immersion depth:

Seals:

Preis anfragen

Fields with * are required
  • 0122-204
  • upon request
  • not suitable for flammable liquids
Description: The Lutz Pump tube (PVDF) is suitable for corrosive, aqueous to slightly...more
Product information "Pump tube PVDF"

Immersion depth: 700 mm
Type of seal: sealless (DL)


Description:

The Lutz Pump tube (PVDF) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. 

  • also available in special immersion depths from 200 - 2500 mm
  • Pump tube equipped with Lutz original hand wheel

Features & Advantages

  • Optionally with electric or compressed air drive
  • No lubricants and therefore no contamination of the pumped medium by lubricants
  • Optimised Drum emptying
  • Universally resistant PTFE shaft bearings
  • Maintenance without special tools
  • Seal modules of the mechanical seal (GLRD) or seal-less (DL) pump can be replaced
Technical data
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): PVDF (polyvinylidene fluoride)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): no seals in contact with the medium
Mechanical seal (material): no seals in contact with the medium
Bearing (material): ETFE / PTFE
Drive shaft (material): Hastelloy C (2.4610)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Delivery rate (up to max. l/min)*: 95
Delivery head (up to max. mWS)*: 25
Fluid temperature (max °C): 100
density (up to kg/dm³): 1.9
Viscosity (up to mPas): 800
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Conveyor wheel shape / drive type: Radial-flow impeller
Seal type: Sealless (SL)
Immersion length (mm): from 500 mm
Immersion tube diameter (up to mm): 41
Thread (inch) outside: 1 1/4"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Type: PVDF 41-L-DL

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Service & Support