REQUEST PRICE

Fields with * are required
LUTZ (U.K.) LTD. | Great Britain
Family business since 1954
julie.mcauley@lutz-jesco.com
+44 24 77 10 33 06
Pump tube PP for residual emptying

Pump tube PP for residual emptying

for low viscosity acids

Immersion depth:

Preis anfragen

Fields with * are required
  • 0103-040
  • upon request
  • not suitable for flammable liquids
Description: The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly...more
Product information "Pump tube PP for residual emptying"

Immersion depth: 700 mm
Type of seal: mechanical seal  (GLRD)


Description:

The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. 

  • also available in special immersion depths from 200 - 2500 mm
  • Pump tube equipped with Lutz original handwheel
  • Suitable for Drum emptying oils such as rapeseed oil and vegetable oil

Features & Advantages

  • Optionally with electric or compressed air drive
  • No lubricants and therefore no contamination of the pumped medium by lubricants
  • Optimised drum residue emptying with remaining residual quantity of approx. 0.1 litre
  • No leakage in case of inclined position or repositioning of the pumping unit
  • Maximum product utilisation with reduced drum cleaning and disposal costs
  • Sealing module of the mechanical seal (GLRD) pump can be replaced
Technical data
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): PP (polypropylene)
Impeller (material): PP (polypropylene)
Static seal (material): FPM (fluororubber)
Mechanical seal (material): Kohle, Keramik, FPM, HC-4 (2.4610)
Bearing (material): Edelkohle
Drive shaft (material): Hastelloy C (2.4610)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Delivery rate (up to max. l/min)*: 69
Delivery head (up to max. mWS)*: 15
Fluid temperature (max °C): 50
density (up to kg/dm³): 2.0
Viscosity (up to mPas): 1000
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Conveyor wheel shape / drive type: Radial-flow impeller
Seal type: Mechanical seal (MS)
Immersion length (mm): from 500 mm
Immersion tube diameter (up to mm): 50
Thread (inch) outside: 1 1/4"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Type: RE PP 41-L GLRD HC

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Stainless steel shaft
Impeller
Service & Support