
Immersion depth: 700 mm
Type of seal: mechanical seal FPM (GLRD FPM)
Note: For the Atex - approval a Pump tube with an explosion-proof Motormust be used, otherwise the ATEX - guidelines cannot be observed.
Description:
The Lutz Pump tube for complete emptying (stainless steel) PURE is suitable for aqueous and fatty food. Depending on the application different Motors are available which can be combined with the Pump tube at any time. Thus you are always flexible and save important resources.
- also available in special immersion depths from 200 - 2500 mm
- Pump tube equipped with Lutz original hand wheel
- to Drum emptying for foodstuffs, cosmetics and pharmaceutical products containing alcohol and flammable cleaning agents
Features & Advantages
- Physiologically harmless design
- Food grade connections
- Optimised drum residue emptying with a remaining quantity of approx. 0.1 litres
- Maximum product utilization with reduced drum cleaning and disposal costs
- Approved according to FDA and regulation (EG) 1935/2004
- Approved according to ATEX directive 2014/34/EU, category 1/2
Pump tube (material): | Niro (Edelstahl) |
Impeller (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
Mechanical seal (material): | Kohle, Keramik, PTFE, HC-4 (2.4610), Edelstahl (1.4571) |
Static seal (material): | FPM (fluororubber), PTFE (Polytetrafluorethen) |
Drive shaft (material): | Edelstahl (1.4571) |
Bearing (material): | Edelkohle |
Delivery rate (up to max. l/min)*: | 78 |
Delivery head (up to max. mWS)*: | 22 |
Fluid temperature (max °C): | 100 |
density (up to kg/dm³): | 1.9 |
Viscosity (up to mPas): | 950 |
Immersion length (mm): | from 500 mm, from 1000 mm, from 1500 mm |
Immersion tube diameter (up to mm): | 41 |
Conveyor wheel shape / drive type: | Radial-flow impeller |
Seal type: | Gleitringdichtung EPDM (GLRD), Gleitringdichtung FPM (GLRD) |
Thread (inch) outside: | Tri-Clamp DN |
Type: | RE Niro 41-L-GLRD |
Certification: | Atex approval, FDA approval, Regulation (EC) 1935/2004 |
Scope of delivery: | Pumpwerk (NIRO) |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler