Family business since 1954
International branch
edwin.gomez@lutz-jesco.com
+44 (0) 2477 103306
Pump tube for mixing and pumping, PP with impeller, shaft stainless steel

Pump tube for mixing and pumping, PP with impeller, shaft stainless steel

Tauchtiefe:

Dichtungsart:

Suitable for mixing and pumping of corrosive and neutral, aqueous up to slightly viscous... more
Immersion length: 1000 mm (sealless)
suitable for emptying 200 l drums

Suitable for mixing and pumping of corrosive and neutral, aqueous up to slightly viscous liquids in non-explosive areas.

Liquid examples:
Emulsions, suspensions and dispersions, paints and lacquers

Features:

  • Two functions („pumping“ and „mixing and pumping“) in one unit
  • Optional with electric or air driven motors
  • No grease fillings
  • Modular, service friendly design
  • Radial-flow impeller (L) for higher delivery head 

Benefits:

  • Change between "pumping" and "mixing and pumping" without moving during operation via a small lever below the handwheel
  • High mixing performance and flow rate for thorough homogenisation and rapid drainage
  • Lube-free pump tube, thus no contamination of the liquid

Special lengths 23"-98" / (600-2500 mm) on request.

Note: The drum must always be covered during the mixing process.

Material: PP (polypropylene)
Explosion Protection: not explosion-proof
PURE version: without PURE version
Materials MP-PP-SL Housing: Polypropylene Bearing: ETFE/PTFE...
Materials MP-PP-SL
Housing: Polypropylene
Bearing: ETFE/PTFE
Drive shaft: Stainless steel (1.4571)
Impeller: Polypropylene
Immersion tube diameter: max. 50 mm
Temperature of medium: max. 50 °C
Hose connection: G 1 1/4 OT
   
Capacity  
Pump capacity:* max. 95 l/min
Pumping head:* max. 25 m wc
Viscosity:** max. 800 mPas

 

* determined with water at 20 °C **determined with oil