Family business since 1954
International branch
julie.mcauley@lutz-jesco.com
+44 (0) 2477 103306
Pump tube B2 Battery PVDF, with rotor

Pump tube B2 Battery PVDF, with rotor

Kurzübersicht

  • Keine Verunreinigung des Fördermediums durch Schmierstoffe

Tauchtiefe:

Suitable for pumping of thin-bodied acids and alkalis, chemicals Features: No grease... more
Immersion depth: 500 mm, with rotor
suitable for filling from small vessels such as canisters or hobbocks
such as chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite.

Suitable for pumping of thin-bodied acids and alkalis, chemicals

Features:

  • No grease fillings
  • Optimized drum drainage
  • Modular, service friendly design

Benefits:

  • Lube-free pump tube, thus no contamination of the liquid
  • Easy maintenance without special tools
  • Sealless construction (MSL) cannot fail by dry running
  • All-purpose resistant ETFE/PTFE shaft bearing

 

Technical data: for motor B2 Battery Immersion tube diameter 32 mm...
Technical data: for motor B2 Battery
Immersion tube diameter 32 mm
Wetted materials PVDF, ETFE, PTFE, Hastelloy C
Impeller Rotor (for higher flow rates)
Seals none
Mechanical seal none
Temperature of medium -15 up to +90 °C
Hose connection G 1 OT
Immersion depth 500 mm
    
Capacity   
Delivery rate up to 80 l/min. (45 l/min.)
Delivery head up to 8 m wc
Viskosity up to 400 mPas
Density 1.6 kg/dm³

Note: 
Specified values are maximum values determined with water at 20°C, measured directly at the pressure joint. Viscosity determined with oil. When using a nozzle the delivery rate is reduced to approximate values (information in the brackets).