suitable for filling from small vessels such as canisters or hobbocks
e. g. Battery acid, ammonia water, urea, acetic acid, photo-developers and fixers, glycols, phosphoric acid, hydrochloric acid and hydrogen peroxide, sodium hydroxide etc.
Suitable for pumping of thin-bodied acids and alkalis, chemicals
- No grease fillings
- Optimized drum drainage
- Modular, service friendly design
- Lube-free pump tube, thus no contamination of the liquid
- Easy maintenance without special tools
- Sealless construction (MSL) cannot fail by dry running
- All-purpose resistant ETFE/PTFE shaft bearing
|Explosion protection:||not explosion-proof|
|PURE version:||without PURE version|
|Technical data:||Pump tube B2 Battery PP|
|Immersion tube diameter||32 mm|
|Wetted materials||PP, PVDF, Hastelloy C, PTFE, ETFE|
|Impeller||Impeller (for higher delivery head)|
|Temperature of medium||-15 up to +50 °C|
|Hose connection||G 1 OT|
|Immersion depth||500 mm|
|Delivery rate||up to 65 l/min. (22 l/min.)|
|Delivery head||up to 12 m wc|
|Viskosity||up to 400 mPas|
Specified values are maximum values determined with water at 20°C, measured directly at the pressure joint. Viscosity determined with oil.
When using a nozzle the delivery rate is reduced to approximate values (information in the brackets).