Family business since 1954
International branch
julie.mcauley@lutz-jesco.com
+44 (0) 2477 103306
Pump tube B2 Battery Stainless steel, with rotor

Pump tube B2 Battery Stainless steel, with rotor

Kurzübersicht

  • Keine Verunreinigung des Fördermediums durch Schmierstoffe
  • Wartung ohne Spezialwerkzeug möglich
  • Dichtungslose Aufführung (DL) bedingt trockenlaufsicher
  • Universell beständige Wellenlagerung aus ETFE/PTFE

Tauchtiefe:

Suitable for pumping of thin-bodied liquids, such as oil-based lubricants, cleaner solvent... more
Immersion depth: 700 mm, with rotor
suitable for filling from small vessels such as canisters or hobbocks
such as chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite.

Suitable for pumping of thin-bodied liquids, such as oil-based lubricants, cleaner solvent and plasticizer

Features:

  • No grease fillings
  • Optimized drum drainage
  • Modular, service friendly design

Benefits:

  • Lube-free pump tube, thus no contamination of the liquid
  • Easy maintenance without special tools
  • Sealless construction (MSL) cannot fail by dry running
  • All-purpose resistant ETFE/PTFE shaft bearing

 

Material: Stainless steel
Explosion Protection: not explosion-proof
PURE version: without PURE version
Technical data: Pump tube B2 Battery SS Immersion tube diameter 28 mm...
Technical data: Pump tube B2 Battery SS
Immersion tube diameter 28 mm
Wetted materials Stainless steel (1.4571), ETFE, PTFE
Impeller Rotor (for higher flow rates)
Seals none
Mechanical seal none
Temperature of medium -15 up to +90 °C
Hose connection G 1 OT
Immersion depth 700 mm
    
Capacity   
Delivery rate up to 80 l/min. (45 l/min.)
Delivery head up to 8 m wc
Viskosity up to 400 mPas
Density 1.6 kg/dm³

Note: 
Specified values are maximum values determined with water at 20°C, measured directly at the pressure joint. Viscosity determined with oil. When using a nozzle the delivery rate is reduced to approximate values (information in the brackets).