window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-1314708-3', 'auto'); ga('require', 'GTM-M2BXSQ5'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); LUTZ pumping station for mixing emulsions and paints from drums
Family business since 1954
International branch
julie.mcauley@lutz-jesco.com
+44 (0) 2477 103306
Pumping station for mixing and pumping, PP with impeller, shaft stainless steel

Pumping station for mixing and pumping, PP with impeller, shaft stainless steel

Dichtungsart:

Suitable for mixing and pumping of corrosive, aqueous to slightly viscous media in...more
Immersion length: 1000 mm (sealless)
suitable for emptying 200 l drums

Suitable for mixing and pumping of corrosive, aqueous to slightly viscous media in non-explosive environments.

Examples of liquids:
Emulsions, suspensions, dispersions, paints and varnishes

properties:

  • Two functions (pumping and mixing and pumping) in one unit
  • Optionally with electric or compressed air drive
  • No grease filling in the pumping station
  • Modular, service-friendly design
  • With radial impeller = L (impeller) for higher heads 

Advantages:

  • Change between pumping and mixing and pumping without changing during operation by means of a small lever below the handwheel
  • High mixing and conveying capacity for thorough homogenisation and rapid emptying
  • No contamination of the pumped medium by lubricants

Special immersion depths on request.

Note: Always mix with drum cover

Material: PP (polypropylene)
Explosion protection: not explosion-proof
PURE version: without PURE version
Materials MP-PP-SL Housing: Polypropylene Bearing: ETFE/PTFE...
Materials MP-PP-SL
Housing: Polypropylene
Bearing: ETFE/PTFE
Drive shaft: Stainless steel (1.4571)
Impeller: Polypropylene
Immersion tube diameter: up to 50 mm
Temperature of medium: up to 50 °C
Hose connection: G 1 1/4 OT
   
Capacity  
Pump capacity:* up to 95 l/min
Pumping head:* up to 25 m wc
Viscosity:** up to 800 mPas

* determined with water at 20 °C
**determined with oil