window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-1314708-3', 'auto'); ga('require', 'GTM-M2BXSQ5'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Lutz Pumpen | Pump station PP for mixing and pumping from IBC containers
Lutz (U.K.) Ltd. | United Kingdom
Family business since 1954
julie.mcauley@lutz-jesco.com
+44 24 77 10 33 06
Pumping station for mixing and pumping, PP with rotor, shaft stainless steel

Pumping station for mixing and pumping, PP with rotor, shaft stainless steel

  • 0110-360

Do you have questions?

  • Phone: +49 (0)9342 8 79-260
  • Email: info@lutz-pumpen.de
Suitable for mixing and pumping of corrosive, aqueous to slightly viscous media from IBC...more
Tauchtiefe: 1200 mm (dichtungslos)
zur Containerentleerung geeignet

Suitable for mixing and pumping of corrosive, aqueous to slightly viscous media from IBC containers in non-explosive environments.

Examples of liquids:
Emulsions, suspensions, dispersions, paints and varnishes

properties:

  • Two functions (pumping and mixing and pumping) in one unit
  • Optionally with electric or compressed air drive
  • No grease filling in the pumping station
  • Modular, service-friendly design
  • With axial impeller = R (rotor) for higher flow rates 

Advantages:

  • Change between pumping and mixing and pumping without changing during operation by means of a small lever below the handwheel
  • High mixing and conveying capacity for thorough homogenisation and rapid emptying
  • No contamination of the pumped medium by lubricants

Special immersion depths on request.

Note: Always mix with drum cover

Werkstoffe MP-PP-DL Gehäuse: Polypropylen Lager: ETFE/PTFE...
Werkstoffe MP-PP-DL
Gehäuse: Polypropylen
Lager: ETFE/PTFE
Antriebswelle: Edelstahl (1.4571)
Förderrad: Polypropylen
Tauchrohr-
durchmesser:
max. 50 mm
Fördermediums-
temperatur:
max. 50 °C
Schlauchanschluss: G 1 1/4 AG
   
Förderleistung  
Fördermenge:* max. 170 l/min
Förderhöhe:* max. 12 m WS
Viskosität:** max. 350 mPas

 *ermittelt mit Wasser bei 20 °C
**ermittelt mit Öl