window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-1314708-3', 'auto'); ga('require', 'GTM-M2BXSQ5'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Pump station B2 Battery Niro, with rotor
Family business since 1954
International branch
julie.mcauley@lutz-jesco.com
+44 (0) 2477 103306
Pump station B2 Battery Niro, with rotor

Pump station B2 Battery Niro, with rotor

Brief overview

  • No contamination of the pumped medium by lubricants
  • Maintenance possible without special tools
  • Seal-less bearing (DL) conditionally safe to run dry
  • Universally resistant shaft bearings made of ETFE/PTFE

Tauchtiefe:

Suitable for decanting low-viscosity media such as oil-based lubricants, cold cleaners and...more
Immersion depth: 700 mm, with rotor
suitable for filling from small vessels such as canisters or hobbocks
such as chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite.

Suitable for decanting low-viscosity media such as oil-based lubricants, cold cleaners and plasticizers

properties:

  • No grease filling in the pumping station
  • Optimized drum emptying
  • Modular, service-friendly design

Advantages:

  • No contamination of the pumped medium by lubricants
  • Maintenance possible without special tools
  • Sealless design (DL) conditionally safe to run dry
  • Universally resistant shaft bearings made of ETFE/PTFE
Technical data: Pump station B2 Battery Niro
Immersion tube diameter 28 mm
Wetted materials Stainless steel (1.4571), ETFE, PTFE
Conveyor wheel Rotor (for larger flow rates)
Seals without
Mechanical seal without
Temperature of the pumped medium -15 to +90 °C
Hose connection G 1 AG
Dive depth 500 mm
    
Delivery rate   
Flow rate max. 80 l/min. (45 l/min.)
Delivery head max. 8 m WS
Viscosity max. 400 mPas
Density 1.6 kg/dm³

Note: 
The specified values are maximum values determined with water at 20° C, measured directly at the discharge connection. Viscosity determined with oil. 
By using a nozzle, the flow rate is reduced to approx. values (data in brackets).

Material: Stainless steel
Explosion protection: not explosion-proof
PURE version: without PURE version
Technical data: Pump tube B2 Battery SS Immersion tube diameter 28 mm...
Technical data: Pump tube B2 Battery SS
Immersion tube diameter 28 mm
Wetted materials Stainless steel (1.4571), ETFE, PTFE
Impeller Rotor (for higher flow rates)
Seals none
Mechanical seal none
Temperature of medium -15 up to +90 °C
Hose connection G 1 OT
Immersion depth 700 mm
    
Capacity   
Delivery rate up to 80 l/min. (45 l/min.)
Delivery head up to 8 m wc
Viskosity up to 400 mPas
Density 1.6 kg/dm³

Note: 
Specified values are maximum values determined with water at 20°C, measured directly at the pressure joint. Viscosity determined with oil. When using a nozzle the delivery rate is reduced to approximate values (information in the brackets).