Pump set - B2 Vario Niro
for liquid lubricants and cleaning agents
- Order number: 0207-030
- Price: upon request
- Set contains universal chemical hose
Immersion depth: 500 mm (sealless)
Hose type: universal chemical hose (for chemical liquids)
For low viscosity media
e.g. glycol, oil-based lubricants, trichloromethane, butylglycol, cold cleaners, motor oils etc.
Properties:
- Infinitely variable speed controller for the transfer and filling of small quantities
- Lubricant-free pumping unit, therefore no contamination of the liquid
- Wide range of applications due to sealless design
- Service-friendly and easy to dismantle
Advantages:
- Infinitely variable adjustment of the delivery rate for safe decanting operation
- Sealless design (DL) conditionally safe to run dry
- No contamination of the pumped medium by lubricants
- Universally resistant ETFE/PTFE shaft bearing
- Maintenance without special tools
- Powerful universal motor with improved service life.
Pump set consisting of:
Motor B2 Vario, pumping unit Niro-DL 28, 1.5 m universal chemical hose 3/4", hose connection Niro 3/4", hose clamps, nozzle Niro, suspension device
| Suitable media: | Weichmacher, Kaltreiniger, Schmiermittel |
| Pump tube (material): | Niro (Edelstahl) |
| Impeller (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Mechanical seal (material): | no seals in contact with the medium |
| Static seal (material): | no seals in contact with the medium |
| Drive shaft (material): | Edelstahl (1.4571) |
| Bearing (material): | ETFE / PTFE |
| Delivery rate (up to max. l/min)*: | 68 |
| Delivery rate with Nozzle (up to max. l/min)*: | 22 |
| Delivery head (up to max. mWS)*: | 6,5 |
| Fluid temperature (max °C): | 50 |
| density (up to kg/dm³): | 1.3 |
| Viscosity (up to mPas): | 300 |
| Immersion length (mm): | up to 500 mm, from 500 mm, from 1000 mm |
| Immersion tube diameter (up to mm): | 32 |
| Conveyor wheel shape / drive type: | Axial-flow rotor |
| Seal type: | Sealless (SL) |
| Thread (inch) outside: | 1" |
| Type of drive: | Electric |
| Output (W): | 200 |
| Voltage (V): | 230 |
| Frequency (Hz): | 50 |
| Protection type: | IP24 |
| Schlauchlänge (mm): | 1500 |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler
