window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-1314708-3', 'auto'); ga('require', 'GTM-M2BXSQ5'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Pump station B2 Battery PVDF, with rotor
Lutz (U.K.) Ltd. | United Kingdom
Family business since 1954
julie.mcauley@lutz-jesco.com
+44 24 77 10 33 06
Pump station B2 Battery PVDF, with rotor

Pump station B2 Battery PVDF, with rotor

Brief overview

  • Keine Verunreinigung des Fördermediums durch Schmierstoffe

Tauchtiefe:

  • 0102-560

Do you have questions?

  • Phone: +49 (0)9342 8 79-260
  • Email: info@lutz-pumpen.de
Suitable for decanting thin-bodied acids and alkalis, chemicals properties: No grease...more
Immersion depth: 500 mm, with rotor
suitable for filling from small vessels such as canisters or hobbocks
such as chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite.

Suitable for decanting thin-bodied acids and alkalis, chemicals

properties:

  • No grease filling in the pumping station
  • Optimized drum emptying
  • Modular, service-friendly design

Advantages:

  • No contamination of the pumped medium by lubricants
  • Maintenance possible without special tools
  • Sealless design (DL) conditionally safe to run dry
  • Universally resistant shaft bearings made of ETFE/PTFE

 

Technical data: for motor B2 Battery Immersion tube diameter 32 mm...
Technical data: for motor B2 Battery
Immersion tube diameter 32 mm
Wetted materials PVDF, ETFE, PTFE, Hastelloy C
Impeller Rotor (for higher flow rates)
Seals none
Mechanical seal none
Temperature of medium -15 up to +90 °C
Hose connection G 1 OT
Immersion depth 500 mm
    
Capacity   
Delivery rate up to 80 l/min. (45 l/min.)
Delivery head up to 8 m wc
Viskosity up to 400 mPas
Density 1.6 kg/dm³

Note: 
Specified values are maximum values determined with water at 20°C, measured directly at the pressure joint. Viscosity determined with oil. When using a nozzle the delivery rate is reduced to approximate values (information in the brackets).