window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-1314708-3', 'auto'); ga('require', 'GTM-M2BXSQ5'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); ATEX drum pump for mixing & pumping solvents, with EX-protection
Family business since 1954
International branch
julie.mcauley@lutz-jesco.com
+44 (0) 2477 103306
Pump set mixing and pumping for solvents

Pump set mixing and pumping for solvents

Tauchtiefe:

Suitable for mixing and pumping flammable and highly flammable liquids and for use in...more
with motor ME II 3 (Ex) with undervoltage release, immersion depth: 1225 mm (with mechanical seal)
Suitable for container emptying Undervoltage release
prevents unexpected start-up of the pump after power failure. Recommended when pumping hazardous liquids.

Suitable for mixing and pumping flammable and highly flammable liquids and for use in potentially explosive environments

Liquid example:
Highly inflammable hydrocarbons, ethanol, petrol, butanol, isopropanol, kerosene, methanol, petroleum, etc. 

properties:

  • Two functions (pumping and mixing and pumping) in one unit
  • No grease filling in the pumping station
  • Modular, service-friendly design
  • With axial impeller = R (rotor) for higher flow rates
  • Approved according to ATEX directive 2014/34/EU, category 1/2

Advantages:

  • Change between pumping and mixing and pumping without changing during operation by means of a small lever below the handwheel
  • High mixing and conveying capacity for thorough homogenisation and rapid emptying
  • No contamination of the pumped medium by lubricants

Pump set consisting of:
Universal motor ME II 3 *, mixing pump station Niro 41-R-GLRD, 1225 mm in stainless steel, 2 m solvent hose 3/4" electrically conductive integrated with hose integration Niro, nozzle Niro / FEP, potential equalization cable.

* according to ATEX directive 2014/34/EU, category 2

Note: Always mix with drum cover

with motor ME II 3, 460 W (explosion-proof)* Dive depth: 1225 mm ...

with motor ME II 3, 460 W (explosion-proof)*

Dive depth: 1225 mm 
Temperature of the pumped medium: max. 100 °C
Delivery rate:  max. 178 l/min. (50 l/min) 
Delivery head:  max. 9 m WS 
viscosity:  max. 200 mPas 

The specified values are maximum values determined with water at 20° C, measured directly at the discharge connection. Viscosity determined with oil. By using the nozzle, the flow rate is reduced to approx. values (data in brackets).

* according to ATEX directive 2014/34/EU, category 2