REQUEST PRICE

Fields with * are required
LUTZ (U.K.) LTD. | Great Britain
Family business since 1954
julie.mcauley@lutz-jesco.com
+44 24 77 10 33 06

Pump Set - Mineral oils

for oils and lubricants

Immersion depth:

Motor:

Preis anfragen

Fields with * are required
  • 0205-301
  • upon request
  • When used with diesel and similar liquids, the pump is only suitable at a fluid and ambient temperature < 40°C.
Description: The Pump Set is suitable for low viscosity, aggressive and non-flammable...more
Product information "Pump Set - Mineral oils"

Motor: MI 4 - 500W, 230V
Immersion depth: 1000 mm (sealless)


Description:

The Pump Set is suitable for low viscosity, aggressive and non-flammable media. Perfectly suited for the removal or transfer of mineral oils.

  • Media examples: Diesel, heating oil, hydraulic oil, machine oil and engine oil etc.
  • Pump tube equipped with Lutz original hand wheel
  • Suitable for filling or transferring alternative fuels

Features & advantages

  • Optionally with electric or compressed air drive
  • No lubricants and therefore no contamination of the pumped medium by lubricants
  • Optimized Drum emptying
  • Universally resistant ETFE shaft bearings
  • Maintenance without special tools
  • Seal modules of the seal-less (DL) pump can be replaced
Technical data
▼ MEDIUM ▼
Suitable media: Motoröl, Maschinenöl, Hydrauliköl, Heizöl, Diesel (<40°C)
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): Alu (Aluminium)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): no seals in contact with the medium
Mechanical seal (material): no seals in contact with the medium
Bearing (material): ETFE
Drive shaft (material): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Delivery rate (up to max. l/min)*: 87
Delivery rate with Nozzle (up to max. l/min)*: 50
Delivery head (up to max. mWS)*: 19
Fluid temperature (max °C): 100
density (up to kg/dm³): 1.4
Viscosity (up to mPas): 500
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Conveyor wheel shape / drive type: Radial-flow impeller
Seal type: Sealless (SL)
Immersion length (mm): from 1000 mm
Immersion tube diameter (up to mm): 41
Thread (inch) outside: 1 1/4"
▼ SCHLAUCH | HOSE | SLANG ▼
Schlauchlänge (mm): 2000
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Type of drive: Electric
Output (W): 500
Voltage (V): 230
Frequency (Hz): 50
Protection type: IP24

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Set
1000 mm
Explosion protection
Pump Set - Solvent Pump Set - Solvent
for highly flammable hydrocarbons
Ex-protection
Electrical
Complete set
Pump Set - Explosive media Pump Set - Explosive media
for aggressive and highly flammable liquids
Service & Support