REQUEST PRICE

Fields with * are required
LUTZ (U.K.) LTD. | Great Britain
Family business since 1954
julie.mcauley@lutz-jesco.com
+44 24 77 10 33 06

Pump Set - concentrated acids and alkalis

for highly chemical liquids and salts

Immersion depth:

Motor:

Preis anfragen

Fields with * are required
  • 0205-211
  • upon request
  • not suitable for flammable liquids
Description: The Pump Set is suitable for corrosive, aqueous to slightly viscous...more
Product information "Pump Set - concentrated acids and alkalis"

Motor: MA II 3 - 460W, 230V
Immersion depth: 1000 mm (sealless)


Description:

The Pump Set is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or transferring concentrated acids and alkalis.

  • Media examples: Chloric acid, chromic acid, sulfuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc.
  • Pump tube equipped with Lutz original handwheel

Features & Advantages

  • Optionally with electric or compressed air drive
  • No lubricants and therefore no contamination of the pumped medium by lubricants
  • Optimised Drum emptying
  • Universally resistant PTFE shaft bearings
  • Maintenance without special tools
  • Seal modules of the seal-less (DL) pump can be replaced
Technical data
▼ MEDIUM ▼
Suitable media: Natriumhypochlorit, Flusssäure, Salpetersäure, Schwefelsäure, Chromsäure, Chlorsäure
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): PVDF (polyvinylidene fluoride)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): no seals in contact with the medium
Mechanical seal (material): no seals in contact with the medium
Bearing (material): ETFE / PTFE
Drive shaft (material): Hastelloy C (2.4610)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Delivery rate (up to max. l/min)*: 78
Delivery rate with Nozzle (up to max. l/min)*: 45
Delivery head (up to max. mWS)*: 16
Fluid temperature (max °C): 100
density (up to kg/dm³): 1.6
Viscosity (up to mPas): 500
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Conveyor wheel shape / drive type: Radial-flow impeller
Seal type: Sealless (SL)
Immersion length (mm): from 1000 mm
Immersion tube diameter (up to mm): 41
Thread (inch) outside: 1 1/4"
▼ SCHLAUCH | HOSE | SLANG ▼
Schlauchlänge (mm): 2000
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Type of drive: Electric
Output (W): 460
Voltage (V): 230
Frequency (Hz): 50
Protection type: IP54

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Set
1000 mm
Electronics
Pump Set - Acids Pump Set - Acids
for acidic liquids
Electrical
Complete set
Stainless steel shaft
Pump Set - Lyes Pump Set - Lyes
for low viscosity chemicals
Service & Support