Cookie preferences
This website uses cookies, which are necessary for the technical operation of the website and are always set. Other cookies, which increase the comfort when using this website, are used for direct advertising or to facilitate interaction with other websites and social networks, are only set with your consent.
Description:
The Hose is used to supply air to the Compressed air motors or the Diaphragm...more
Product information "PTFE-Hose"
Nominal width: DN 13 (1/2")
Nominale grootte DN 13
Description:
The Hose is used to supply air to the Compressed air motors or the Diaphragm pumps.
- DN 8 / DN 13
Features & Advantages
- Material: PTFE
- Operating pressure up to max. 6,5 bar
- Negative pressure up to max. 0.7 bar
Technical data
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Fluid temperature (max °C): | 100 |
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Produktgruppe: | Membranpumpen |
Accessories group: | Hoses / Discharge spouts / Suction pipe |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter