Family business since 1954
International branch
edwin.gomez@lutz-jesco.com
+44 (0) 2477 103306
Pump Set B2 Battery SS with rotor

Pump Set B2 Battery SS with rotor

Tauchtiefe:

For thin-bodied fluids   e.g. Glycols, oil-based lubricants, trichloromethane, butyl... more
Immersion length: 500 mm (sealless)
suitable for filling from small vessels such as canisters or hobbocks
Conditionally safe to run dry

For thin-bodied fluids 
e.g. Glycols, oil-based lubricants, trichloromethane, butyl glycol, cleaner solvent, motor oils etc.

Features:

  • Infinitely variable speed controller allows a controlled filling of smaller and larger liquid amounts
  • Automatic switch-off at overload
  • Replaceable with Li-Ion technology
  • Wear-free, low noise BLDC motor
  • Lube free pump tube, thus no contamination of the liquid
  • Optimized drum drainage
  • Modular, service friendly design
  • Wide range of applications possible due to sealless construction
  • Service-friendly and simple to dismantle
  • Axial-flow rotor (R) for higher flow rates

Benefits:

  • Variable flow rate for a convenient and safe transfer
  • High battery capacity
  • Long service life due to BLDC motor
  • Sealless construction (MSL) cannot fail by dry running
  • Lube-free pump tube, thus no contamination of the liquid
  • All-purpose resistant ETFE/PTFE shaft bearing
  • Easy maintenance without special tools

Pump set consisting of:
Motor B2 Battery, Pump tube SS 28-R MSL in stainless steel, 1.5 m PVC hose 3/4", hose clips, nozzle stainless steel FEP (Battery and charging station not included)

Material: Stainless steel
Explosion Protection: not explosion-proof
Motor SS with rotor Performance 70 watts (internally ventilated)...
Motor SS with rotor
Performance 70 watts (internally ventilated)
Voltage 21.6 V
Capacity 4 Ah
Materials  
Housing Stainless steel (1.4571)
Bearing ETFE/PTFE
Drive shaft Stainless steel (1.4571)
Seals ohne
Mechanical seal ohne
Impeller ETFE
Type of impeller Rotor
Temperature of medium -15 bis +90 °C
Immersion tube diameter 28 mm
Immersion depths 500 mm
Weight 4.4 kg
   
Capacity  
Delivery rate max. 80 l/min. (45 l/min.)
Delivery head max. 8 m wc
Viskosity max. 400 mPas
Density 1.6 kg/dm³


Note:

Specified values are maximum values determined with water at 20°C,  measured directly at the pressure joint. Viscosity determined with oil. When using a nozzle the delivery rate is reduced to approximate values  (information in the brackets).