window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-30861926-1', 'auto'); ga('require', 'GTM-M2BXSQ5'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Submersible centrifugal pump B6 | Centrifugal Pumps | Products | Lutz - GB
REQUEST PRICE

Fields with * are required
LUTZ (U.K.) LTD. | Great Britain
Family business since 1954
julie.mcauley@lutz-jesco.com
+44 24 77 10 33 06
Submersible centrifugal pump B6

Submersible centrifugal pump B6

in the polypropylene (PP) version

Fördermenge:

Preis anfragen

Fields with * are required
  • 0118-047
  • op verzoek
  • The standard nominal dimensions of the pumping unit are 400-1000 mm. The desired nominal dimension should always be specified when ordering
Description: High performance, compact dimensions, low weight - everything fits with the...more
Product information "Submersible centrifugal pump B6"

Delivery rate: 24 m³/h
Note: For excess lengths over 1000 mm, the article number
0118-419 is always recorded for every 100 mm or part thereof.

Example with a nominal dimension of 1500 mm , the additional price 0118-419 5x is recorded


Materiaal: PP

Description:

High performance, compact dimensions, low weight - everything fits with the Lutz B6. The pump shaft is protected by a shaft guide tube against possible "attack" of the pumped medium. Perfectly suited for pumping and draining of  neutral and aggressive liquids with low solids content.

  • on request also available in special immersion depths of 1000 - 3000 mm
  • Design according to the single pipe principle
  • Application examples: For conveying and circulating chemicals and solutions in surface treatment, chemical industry and water treatment, etc.

Features & Advantages

  • Wide range of applications
  • No risk of leakage at the bottom outlet due to safe product removal
  • Low wear
  • Stationary installation possible via flange
  • Also for small container openings
Technical data
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): PP (polypropylene)
Impeller (material): PP (polypropylene)
Mechanical seal (material): Keramik,FPM,HC
Static seal (material): FPM (fluororubber)
Drive shaft (material): Hastelloy C (2.4610)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Fördermenge (bis max. m³/H)*: 24, 33 , 42, 56
Delivery head (up to max. mWS)*: 9, 11 , 12, 15
Fluid temperature (max °C): 50
Viscosity (up to mPas): 1200, 2000, 3000, 4,000 (e.g. shampoo)
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Immersion tube diameter (up to mm): 166
Conveyor wheel shape / drive type: Radial-flow impeller
Seal type: Mechanical seal (MS)
Thread (inch) outside: 2 3/4"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Version: Vertical
Type: B6/15 PP, B6/30 PP, B6/45 PP, B6/60 PP

* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt.

** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler

Service & Support