Hydraulic Drum emptying system with follower plate

Preview: Hydraulic Drum emptying system with follower plate

Hydraulic Drum emptying system with follower plate

Order number: 0370-110

Any questions?

Phone: +44 (0) 2477 103306
Email: edwin.gomez@lutz-jesco.com

Due to its inﬁnitely variable operation, the mobile, hydraulic drum emptying system with... more

Close menu

Due to its inﬁnitely variable operation, the mobile, hydraulic drum emptying system with follower plate from Lutz is especially designed for the gentle emptying of drums ﬁlled with high-viscosity, paste-like and viscous substances.

Examples of suitable liquids:
Lipstick, emulsion paint, ice cream, yogurt, tomato paste, honey, fats, glucose, mascara, lip gloss, creams, vaseline®, ointments, jelly, vegetable purée, fruits as well as juices for babies and small children.

Characteristics/Advantages:

Gentle operation by manual inﬁ nitely variable control of the follower plate via control valve
Securing the drums by holding clamps
To be used for cylindrical or slightly conical drums, plastic containers or containers with inliner
Almost residue-free emptying of the drums
Pulsation-free pumping/emptying
Emptying speed adjustable
No lateral escaping of the medium as follower plate is guided down
Easy and quick change of sealing lip (on request, follower plate can be adapted to container/drum)
Can also be used as a mobile drum pump system without the follower plate
Quick removal of the pump or outer tube for cleaning
Further options possible

Complete system consisting of:

Order No.	Description
0370-110	Follower plate system with trolley and hydraulic power unit
0370-120	Special follower plate adjusted diameters with various sealing lips
0176-804	3-phase motor, 230/400V, 50Hz, 1.5kW, IE2, with foot with frequency converter, 400V, 50Hz, 180-900 1/min
0172-560	Pump tube B70V-H-D 50.1 SanitaryPlus Ex MS - PTFE/FPM, 1100 mm, tri-clamp inlet

Technical data Material: stainless steel polished Flow...

Technical data
Material:	stainless steel polished
Flow rates (depending on the pump size):	up to 120 l/min.
Motors:	Three-phase motors beginning with 0,75 kW, with foot-mounted/ ﬂanged version and frequency converter or gearmotor and compressed air motors
Pump:	Eccentric screw pump with Tri-Clamp connection on the pump foot Length 1100 mm
Sealing lip:	EPDM, optionally FKM and PTFE
Max. bearing load hydraulic arm:	100 kg
Inﬁ nitely variable:	0-5 cm/s
Required power supply:	400 V/50 Hz, 3-phase, 16 A
Lube-free compressed air:	max. 8 bar
Dimensions:	Width: 0,55 m Length: 1,14 m Height (lowest position): 2,12 m Height (top position): 2,68 m
Weight trolley (without pump):	140 kg