Fields with * are required
LUTZ (U.K.) LTD. | Great Britain
Family business since 1954
+44 24 77 10 33 06
Flange connection

Flange connection

made of plastic for the Flow Meter ST10 / SL10


Preis anfragen

Fields with * are required
  • 0211-131
  • op verzoek
  • is not suitable for hazardous areas
Description: The flange connection is required to connect the Flow Meter ST 10 / SL10...more
Product information "Flange connection"

Material: PPO
Seals: FPM

voor type ST10 en SL10, DN 32, PN 10 aan beide zijden
Materiaal: PPO/FPM


The flange connection is required to connect the Flow Meter ST 10 / SL10 to a piping system. To connect the Flow Meter LM10 / UN 10 to a a piping system connection with the conductive  flange connection is required in the PPS version.

  • Materials PPO / PPS

Properties & Advantages

  • Flange connection: DN 20 / PN 10
  • Seals: FPM and FPM - FEP
Technical data
Produktgruppe: Durchflussmesser
Accessories group: Connections

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Service & Support