Family business since 1954
International branch
edwin.gomez@lutz-jesco.com
+44 (0) 2477 103306
Drum pump MP-SS with motor MA II 3

Drum pump MP-SS with motor MA II 3

Suitable for mixing and pumping corrosive and neutral, aqueous up to slightly monitoring in... more
Mechanical seal, with rotor
for higher flow rates

Suitable for mixing and pumping corrosive and neutral, aqueous up to slightly monitoring in non-explosive areas.

Liquid examples:
Emulsions, suspensions and dispersions, paints and lacquers

Features:

  • Two functions („pumping“ and „mixing and pumping“) in one unit
  • No grease fillings
  • Modular, service friendly design

Benefits:

  • Change between "pumping" and "mixing and pumping" without moving during operation via a small lever below the handwheel
  • High mixing performance and flow rate for thorough homogenisation and rapid drainage
  • Lube-free pump tube, thus no contamination of the liquid

Note: The drum must always be covered during the mixing process.

Material: Stainless steel
Explosion Protection: not explosion-proof
Materials MP-SS with rotor Housing: Stainless steel (1.4571) Bearing:...
Materials MP-SS with rotor
Housing: Stainless steel (1.4571)
Bearing: Pure carbon
Drive shaft: Stainless steel (1.4571)
Impeller: ETFE
Immersion tube diameter: 41 mm
Temperature of medium: max. 100 °C
Hose connection: G 1 1/4 OT
Immersion length: 1000 mm
   
Capacity  
Pump capacity:* max. 178 l/min.
Pumping head:* max. 9 m wc
Viscosity:** max. 200 mPas
Density:*** max. 1.2 kg/dm³


Hose connector is not included in scope of supply

* determined with water at 20 °C
** determined with oil
*** determined with 3 m hose 3/4" and open nozzle 3/4"