Family business since 1954
International branch
julie.mcauley@lutz-jesco.com
+44 (0) 2477 103306
Eccentric screw pump B70V in PURE version, Ex (with three-phase motor motor)

Eccentric screw pump B70V in PURE version, Ex (with three-phase motor motor)

Fördermenge:

The B70V in PURE version is a powerful eccentric screw pump for medium-viscous, highly viscous... more
Flow rate: 12 l/min. (non ex-proof)

The B70V in PURE version is a powerful eccentric screw pump for medium-viscous, highly viscous and slow-moving liquids up to the limits of flowability. Alternatively driven by direct-coupled three-phase motors

Liquid examples:
Ideal for pumping viscous mineral oils, cosmetics, food, resins, emulsions, paints and many other viscous materials. 

Features:

  • For medium viscous up to highly viscous liquids and hardly flowable liquids
  • Displacement pump with bearing flange using the eccentric screw principle
  • With three-phase drive
  • Drive motor optionally available with integrated frequency converter.
  • Pump tube with Tri-clamp connection
  • Special application in the food and cosmetics industry
  • For mobile and stationary application
  • Easily detachable outer pipe

Benefits:

  • Gentle product pumping
  • Constant flow
  • A large selection on robust and powerful drive motors
  • Controlled speed adjustment (with frequency converter)
  • Simple cleaning
  • Smooth running and low wear

Sealing system:
Mechanically sealed (MS)

Drive shaft:
Torsion shaft or universal joint shaft

Stator:
PFTE

Immersion length:
1000 and 1100 mm

 

All materials coming into contact with the pumped liquid are physiologically safe.
The pump tubes are mainly used in the food, cosmetics and pharmaceutical industry.

  B70V-D 12.1 PURE (Ex) Housing: Stainless steel (1.4571/1.4404)...
  B70V-D 12.1 PURE (Ex)
Housing: Stainless steel (1.4571/1.4404)
Seals: FPM (alternatively EPDM)
Mechanical seal: WC/WC/FPM (with seal FPM), WC/WC/EPDM (with seal EPDM)
Drive shaft: Universal joint shaft steel (1.4571)
Rotor: Stainless steel (1.4571)
Stator: PFTE
Immersion tube diameter: 54 mm
Temperature of medium: max. 140 °C (PFTE)**
Hose connection: G 1 1/2 OT 
Immersion depth:*** 1000 mm 
   
Capacity  
Flow rate:* max. 12 l/min 
Pumping head:* max. 6 bar
Viscosity: 1- 100,000 mPas 

Figure with three-phase motor and frequency converter

Explosion-proof eccentric screw pump approved category 1 / 2 (according to ATEX)
for pumping flammable liquids of explosion group IIA and temperature class T4

* determined with water at 20°C; three-phase motor (9001/min) and elastomer stator
**When using explosion-proof eccentric screw drum pump B70V the temperature of the pumped medium must not exceed 100 °C
***Special lengths only with universal joint shaft version from 500-2,000 mm on request)