REQUEST PRICE

Fields with * are required
LUTZ (U.K.) LTD. | Great Britain
Family business since 1954
julie.mcauley@lutz-jesco.com
+44 24 77 10 33 06
Eccentric screw pump tube B70V-D Industry

Eccentric screw pump tube B70V-D Industry

for three-phase motors

Drive shaft:

Statormaterial:

Preis anfragen

Fields with * are required
  • 0172-121
  • upon request
  • For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with Mechanical seal (GLRD), cardan shaft (GW) and PTFE stator.
Description: The Eccentric screw pump B70V-D 25.1 in the industrial version is a powerful...more
Product information "Eccentric screw pump tube B70V-D Industry"

Delivery rate: 25 l/min. 
Drive shaft: Torsion shaft (TW)
Type of seal : Mechanical seal (GLRD)
Note: No Ex-approval


Description:

The Eccentric screw pump B70V-D 25.1 in the industrial version is a powerful positive displacement pump for medium, high viscosity and viscous media up to the limits of flowability. Depending on the application, various three-phase and air motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.

  • Cardan shaft versions also available in special immersion depths of 500 - 2000 mm
  • Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials. 

Features & Advantages

  • Uniform volume flow
  • Easy and fast cleaning
  • Gentle, low-pulsation product conveying
  • Smooth running and low wear
  • Large selection of robust and powerful drive motors
  • Approved according to ATEX Directive 2014/34/EU, Category 1/2
Technical data
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): Edelstahl (1.4571/1.4404)
Static seal (material): FPM (fluororubber)
Mechanical seal (material): Kohle, CrMO-Guss, FPM
Drive shaft (material): Edelstahl (1.4571)
Stator (Werkstoff): NBR hell (Nitrilbutadienkautschuk)
Rotor (Werkstoff): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Delivery rate (up to max. l/min)*: 25
Delivery head (up to bar)*: 8
Fluid temperature (max °C): 80
Viscosity (up to mPas): 100000
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Conveyor wheel shape / drive type: Torsionswelle (mittelviskose Medien)
Seal type: Mechanical seal (MS)
Immersion length (mm): from 1000 mm
Immersion tube diameter (up to mm): 54
Statorgröße: 25.1
Thread (inch) outside: 1 1/2"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Explosion protection: No
Type of drive: Three phase
Certification:
Type: B70V-D

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Service & Support