Family business since 1954
International branch
julie.mcauley@lutz-jesco.com
+44 (0) 2477 103306

Double diaphragm pump 3/8” made of PVDF

Werkstoffe Membranen, Ventilkugeln, Dichtungen:

Suitable for highly aggressive liquids Application examples: Suitable for chemical... more
Werkstoffe TPV (EPDM-PP), TPV (EPDM-PP), EPDM/b>

Suitable for highly aggressive liquids

Application examples:
Suitable for chemical recirculation and feed, liquids with solid particles, e.g. paints and lacquers, galvanic fluids, etc.

Features:

  • Absolutely free of oil 
  • Absolutely safe to run dry
  • Self-priming, even dry
  • Centre block made of corrosion-free plastic
  • Just a few components, easily accessible
  • Flow rate up to 9 GPM (34 l/min)
  • Explosion-proof version approved according to ATEX Directive 2014/34/EU, Category 2

Benefits:

  • No failure of the pump due to lack of lubrication
  • No contamination of the environment or of the product itself by oil vapour
  • Gentle pumping of thick-bodied, contaminated and abrasive liquids
  • No direct chemical attack of the air-conducting parts in case of membrane rupture
  • Easy maintenance without special tools
Werkstoffe DMP 3/8" KNE PVDF/TPV (EPDM-PP) Gehäuse: PVDF Membrane:...
Werkstoffe DMP 3/8" KNE PVDF/TPV (EPDM-PP)
Gehäuse: PVDF
Membrane: TPV (EPDM-PP)
Ventilkugel: TPV (EPDM-PP)
Dichtung: EPDM
Fördermediums-
temperatur:
max. 93 °C
Lufteinlass: 1/4" NPT IG
(1/2" BSP IG)*
Luftauslass: 3/8" NPT IG
Saugstutzen: 3/8" BSP IG
Druckstutzen: 3/8" BSP IG
Gewicht:  2,3 kg
   
Förderleistung  
Fördermenge: max. 34 l/min.
Saughöhe trocken: max. 3 m
Betriebsdruck: max. 8,2 bar
Feststoffe bis: max. Ø 1,6 mm 

Serienmäßig mit Max-Pass™-Ventil

* bei Verwendung des Kugelhahns (nicht im Lieferumfang enthalten)