||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-1314708-3', 'auto'); ga('require', 'GTM-M2BXSQ5'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Druckluft-Membranpumpe für brennbare Medien ex-geschützt nach Atex
Family business since 1954
International branch
+44 (0) 2477 103306

Double diaphragm pump 3/8” made of PA (PTFE version)

Werkstoffe Membranen, Ventilkugeln, Dichtungen:

Suitable for easily flammable liquids Application examples: Suitable for chemical...more
Werkstoffe PTFE, PTFE, PTFE

Suitable for easily flammable liquids

Application examples:
Suitable for chemical recirculation and feed, liquids with solid particles, e.g. paints and lacquers, galvanic fluids, etc.


  • Absolutely free of oil 
  • Absolutely safe to run dry
  • Self-priming, even dry
  • Centre block made of corrosion-free plastic
  • Just a few components, easily accessible
  • Flow rate up to 34 l/min
  • Explosion-proof version approved according to ATEX Directive 2014/34/EU, Category 2


  • No failure of the pump due to lack of lubrication
  • No contamination of the environment or of the product itself by oil vapour
  • Gentle pumping of thick-bodied, contaminated and abrasive liquids
  • No direct chemical attack of the air-conducting parts in case of membrane rupture
  • Easy maintenance without special tools
Housing Material: PA (polyamide)
Explosion protection: explosion-proof
PURE version: without PURE version
Size: 3/8"
Werkstoffe DMP 3/8" NTC PA/PTFE (explosionsgeschützt) Gehäuse: PA...
Werkstoffe DMP 3/8" NTC PA/PTFE (explosionsgeschützt)
Gehäuse: PA
Membrane: PTFE
Ventilkugel: PTFE
Dichtung: PTFE
max. 66 °C
Lufteinlass: 1/4" NPT IG
(1/2" BSP IG)*
Luftauslass: 3/8" NPT IG
Saugstutzen: 3/8" BSP IG
Druckstutzen: 3/8" BSP IG
Gewicht: 2,3 kg
Fördermenge: max. 34 l/min.
Saughöhe trocken: max. 3 m
Betriebsdruck: max. 8,2 bar
Feststoffe bis: max. Ø 1,6 mm 

* bei Verwendung des Kugelhahns (nicht im Lieferumfang enthalten)