REQUEST PRICE

Fields with * are required
LUTZ (U.K.) LTD. | Great Britain
Family business since 1954
julie.mcauley@lutz-jesco.com
+44 24 77 10 33 06

Pump Set - Solvent

for highly flammable hydrocarbons

Immersion depth:

Motor:

Preis anfragen

Fields with * are required
  • 0205-471
  • upon request
  • is suitable for the Ex - area
Description: The Pump Set is suitable for low viscosity, flammable and combustible...more
Product information "Pump Set - Solvent"

Motor: MD2xL - 1000W, 6 bar, comfort handle (for higher flow rate, viscosity and density)
Immersion depth: 1000 mm (sealless)


Description:

The Pump Set is suitable for low viscosity, flammable and combustible hydrocarbons. Perfectly suited for the removal or decanting of solvents.

  • Media examples: Ethanol, gasoline, butanol, isopropanol, kerosene, methanol and petroleum.etc.
  • Pump tube equipped with Lutz original hand wheel
  • Suitable for filling or transferring alternative fuels, oils, flammable liquids

Features & Advantages

  • Optionally with electric or compressed air drive
  • No lubricants and therefore no contamination of the pumped medium by lubricants
  • Highly resistant noble carbon shaft bearing
  • Maintenance without special tools
  • Seal modules of the seal-less (DL) pump can be replaced
  • Approved according to ATEX directive 2014/34/EU, category 1/2
Technical data
▼ MEDIUM ▼
Suitable media: Petroleum, Methanol, Kerosin, Isopropanol, Butanol, Benzin, Ethanol
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): Niro (Edelstahl)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): no seals in contact with the medium
Mechanical seal (material): no seals in contact with the medium
Bearing (material): Edelkohle
Drive shaft (material): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Delivery rate (up to max. l/min)*: 124
Delivery rate with Nozzle (up to max. l/min)*: 75
Delivery head (up to max. mWS)*: 35
Fluid temperature (max °C): 100
density (up to kg/dm³): 2.8
Operating pressure (max. bar): lower than 6 bar
Viscosity (up to mPas): 1000
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Conveyor wheel shape / drive type: Radial-flow impeller
Seal type: Sealless (SL)
Immersion length (mm): from 1000 mm
Immersion tube diameter (up to mm): 41
Thread (inch) outside: 1 1/4"
▼ SCHLAUCH | HOSE | SLANG ▼
Schlauchlänge (mm): 2000
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Explosion protection: Yes
Type of drive: Compressed air
Output (W): 1000
Frequency (Hz): 50
Protection type: IP54
Version: Komfortgriff

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Ex-protection
Electrical
Complete set
Pump Set - Explosive media Pump Set - Explosive media
for aggressive and highly flammable liquids
Set
1000 mm
Explosion protection
Pump Set for residual emptying - solvent Pump Set for residual emptying - solvent
for highly flammable hydrocarbons
Service & Support