Fields with * are required
LUTZ (U.K.) LTD. | Great Britain
Family business since 1954
+44 24 77 10 33 06
Basiszähler für Lutz Durchflussmesser

Base meter LM10

Preis anfragen

Fields with * are required
  • 0230-520
  • upon request
  • A communication module is required for data transmission to external signal processing (e.g. PLC).
Description: The basic meter is required for decentralized installation and external...more
Product information "Base meter LM10"

Version: for type LM10


The basic meter is required for decentralized installation and external data evaluation. In case of larger distances between measuring and control point or difficult to access installation locations in the plant, the individual modules (basic meter, operating unit, relay module, etc.) can be installed separately from each other. The data transmission between the components is established without cumbersome wiring by means of plug connections via a data line and a protective cover / pulse converter.

  • Material: PPS

Features & Advantages

  • Measuring chamber: LCP
  • Seals: FEP
  • Magnet material: BaFE / MS / stainless steel (1.4401)
  • Type of protection: II 2G Ex h IIB Gb X
Technical data
Certification: ATEX Richtlinie (ATEX Richtlinie 2014/34/EU)
Produktgruppe: Exzenterschneckenpumpen, Durchflussmesser
Accessories group: Basic flow meter / Operating unit

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Service & Support